logo
Quote request suatu |
Rumah ProdukLem Epoksi AB

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Semua produk

Lem Epoksi AB

(118)

Perekat Akrilik Modifikasi

(31)

Tidak Ada Lagi Lem Kuku

(17)

perekat pengunci ulir

(22)

Pembuat gasket

(36)

lem super 502

(8)

Pelumas Keramik

(7)

Hardware Gam Elektronik

(14)

Lem Otomotif

(14)

Lem Pembuatan Rumah Tangga

(12)

Lem Dekorasi Furnitur

(7)
I 'm Online Chat Now

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Gambar besar :  Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Detail produk:
Tempat asal: Hunan, Tiongkok
Nama merek: DEYI
Syarat-syarat pembayaran & pengiriman:
Kuantitas min Order: 10.000
Kontak

Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours

Deskripsi
Warna: Jernih Viskositas: > 100000 cps/25 ℃
Rasio Campuran: 1: 1 Waktu Kerja: 20 menit
Sentuh waktu kering: 30 Menit Waktu penyembuhan penuh: 24 jam
Kekuatan geser pangkuan: ≥16 KKL Tahan Panas: -60 hingga +100 ℃
Umur Simpan: 12 bulan Bahan Utama: Etil sianokrilat
Resistensi asam: Ya Resistensi alkali: Ya
Resistensi minyak: Ya Tahan air: Ya
Tidak Mudah Terbakar: Ya
Menyoroti:

Heat Resistant Epoxy AB Glue

,

Touch Dry in 30 Minutes Epoxy Resin Adhesive

,

Full Cure in 24 Hours Two-Component Epoxy

30 Minutes Epoxy Resin/Epoxy Adhesive AB Glue Black and White
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 0
DEYI-730 30 minutes epoxy resin/epoxy adhesive AB glue black and white
30-MIN EPOXY ADHESIVE is resistant to acid, alkali, and oil. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filed, grinded and drilled.
Technical Parameters
Color Viscosity (CPS/25℃) Mixture Work Time (25℃/100g) Cure Time (25℃/100g) Lap Shear Strength (St-St) Heat Resistance (℃) Shelf Life (25℃)
A:black A:>100000 1:1 20 Minutes Touch Dry:30 Mins ≥16 Mpa -60 to +100 12 months
B:milky white B:>100000 Full Cure: 24 hrs
Product Description
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 1 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 2 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 3 Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 4
Storage & Warnings
Storage:
  • Store the adhesive in shady, dry, well-ventilated, damp-proofing places.
  • Store the adhesive at room temperature.
  • Keep away from any source of ignition.
Warnings:
  • The adhesive is irritable to skin and eyes.
  • Keep out of reach of children.
  • In case of skin or eye contact, flush with water and seek medical treatment immediately if necessary.
Directions
  • Clear the contaminants like water, dusts, oil of the substrate surface to keep it clean, dry and smooth.
  • Remove the cap from the tube and puncture the tubes.
  • Mix part A and part B at the ratio of 1:1. Mix thoroughly until a uniform color is achieved. It must be used within 20 minutes.
  • Apply a thin coat to both surfaces. Mixture will become warm while it sets. No clamping. Slight pressure is needed while material sets.
  • If temperature is below 5℃, it will take a longer time to cure.
Cautions
Heat Resistant (-60 to +100°C) Epoxy AB Glue with Touch Dry in 30 Minutes and Full Cure in 24 Hours 5

Label:

perekat ab,

Ab perekat perekat,

Ab perekat epoksi

Rincian kontak
Hunan Baxiongdi New Material Co., Ltd.

Kontak Person: SU

Tel: 008615200906996

Faks: 86-731-86677379

Mengirimkan permintaan Anda secara langsung kepada kami (0 / 3000)

Tentang

Lem Epoksi AB

Super Kuat Epoxy Resin Perekat Untuk Kesehatan Las Logam Tidak beracun AB Epoxy Glue

AB Epoxy Adhesive Jelas dan tahan panas untuk baja tahan karat suhu tinggi

Sistem Resin Epoxy Profesional 30 Min Mengobati Perekat Transparan Resina Epossidica

Perekat Akrilik Modifikasi

5 Menit Pengeringan Awal Perekat Akrilik Modifikasi Untuk Permukaan Merah Dan Hijau

Jt40 Acrylic Modified AB Acrylic Glue Dan Hijau Translucent Dengan Waktu Kerja 5min

Perekat Akrilik Transparan yang Dimodifikasi AB 5 Menit Untuk Kebutuhan Sehari-hari

Tinggalkan pesan

Kebijakan pribadi | Cina Bagus kualitas Lem Epoksi AB pemasok. © 2024 - 2025 Hunan Baxiongdi New Material Co., Ltd.. All Rights Reserved.